Loading...
HomeMy WebLinkAboutC&D Transfer Station Waste Ban 2019.4.16Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Important:When completing this form on a computer, useonly the Tab key to move your cursor – not the Return key. Third-Party Inspection Report (Waste Ban) – Rev. 12/4/14 Page 1 of 8 Instructions Use this form to record and report the results of a Third-Party Waste Ban Compliance Inspection conducted pursuant to 310 CMR 19.018. Be sure to obtain the most recent version of this form. All applicable sections of the submitted form must be completed to be accepted by MassDEP. Pursuant to 310 CMR 19.018(8)(a), the third-party inspector and facility owner/operator must sign this Third-Party Inspection Report form and submit the completed report to the appropriate MassDEP regional office and one copy of each completed report to the board of health of the municipality in which the facility is located. In the event that this inspection report contains a recommendation for corrective action(s), the owner/operator shall also submit the information required by 310 CMR 19.018(8)(c)2. Forms and instructions are available online: http://www.mass.gov/eea/agencies/massdep/recycle/approvals/solid-waste-applications-and-forms.html#8 Pursuant to 310 CMR 19.018(7)(b), facilities that do not accept loads greater than five cubic yards, and facilities that participate in the Class II Recycling Program in accordance with 310 CMR 19.300, are exempt from the requirements of 310 CMR 19.018(7). Note: This form does not identify all of the requirements applicable to each solid waste management facility; other requirements and/or policies may apply to the operation, maintenance and monitoring of each facility. MassDEP Use Only Rec’d Date: FMF #: RO #: Reviewer: Comments: I. Facility Information Facility Type (check one): Transfer Station/Handling Facility C&D Waste Processor or C&D Waste Transfer Station Municipal Waste Combustor Active Landfill Other Specify Facility: Nantucket Transfer Station Facility Name Nantucket City/Town MA State 02554 ZIP Code (508) 228-4283 Telephone Number 457936 Regulated Object Account Number FMF Number Operator: Waste Options Nantucket, LLC Operator Name (Doing Business As/Company Name) (508) 228-4283 Telephone Number nathanwidell@comcast.net Email Address 188 Madaket Road Mailing Address Nantucket City/Town MA State 02554 ZIP Code Permittee: Waste Options Nantucket, LLC / Town of Nantucket Permittee Name (Entity Identified on Facility Permit) (508) 228-4283 Mailing Address Nantucket City/Town MA State 02554 ZIP Code Responsible Official: Nathan Widell, General Manager Responsible Official Name (Individual) nathanwidell@comcast.net Responsible Official Email Address Waste Options Nantucket, LLC Responsible Official Company Name (508) 228-4283 Responsible Official Telephone Number Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 2 of 8 II. Third-Party Inspector Mike Quatromoni Third-Party Inspector Name SITEC Environmental, Inc. Company Name SW48-0000077 MassDEP Third-Party Inspector Identification Number 06/30/2019 MassDEP Third-Party Inspector Expiration Date (MM/DD/YYYY) (781) 319-0100 Telephone Number mquatromoni@sitecenv.com Email Address 769 Plain Street, Unit C Mailing Address Marshfield City/Town MA State 02050 ZIP Code III. Inspection Details A. FREQUENCY Indicate the scheduled inspection frequency for this facility (as required by 310 CMR 19.018(7)(d), or a more frequent schedule set forth in the Facility Permit/Other Approval): Bi-Monthly Quarterly Semi-Annual Annual Other (include permit/approval type and date of issuance): B. DATE, TIME & PERSONNEL Inspection Date (MM/DD/YYYY): 4/16/19 Inspection Start Time: 10:00 AM PM Facility Representatives in Attendance During Inspection: John Beans, Operations Manager C. GENERAL COMMENTS The facility was in very good condition. Operational personnel and management were knowledgeable and cooperative during the inspection. Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 3 of 8 IV. Pre-Inspection Preparation A. FACILITY-SPECIFIC WASTE BAN COMPLIANCE REQUIREMENTS During each third-party inspection, the third-party inspector shall assess compliance with the waste bans by the facility and by the haulers and generators delivering waste to the facility, in order to determine the facility’s compliance with all applicable waste ban requirements as set forth in 310 CMR 19.018(7)(c)1. Therefore, pursuant to 310 CMR 19.018(7)(c)1, prior to conducting a third-party waste ban inspection, the third-party inspector shall, without limitation, complete all of the following: Identify, review and become familiar with all solid waste requirements applicable to waste ban compliance at the facility including the facility’s waste ban compliance plan, as approved by the Department. Review and become familiar with the regulations set forth at 310 CMR 19.017 –Waste Bans. Review and become familiar with MassDEP’s Guidance for Solid Waste Handling and Disposal Facilities on Compliance with MassDEP’s Waste Bans. I,Geoffrey Souza, have identified, reviewed and understand all of the aforementioned requirements that are applicable to this facility and the following are my observations and recommendations related to the facility-specific requirements. ►GS Inspector Initials B. CURRENT WASTE BAN COMPLIANCE PLAN 6/2014 Plan Date (MM/DD/YYYY) NA Approval Date, if applicable Identify the number of comprehensive load inspections the facility is required to conduct each month*: (see Waste Ban Compliance Plan, Part D)4 Number of Loads *Note: This is independent from and may be different than the required number of loads observed during a Third-Party Waste Ban Inspection. C. MINIMUM NUMBER OF LOADS FOR OBSERVATION Identify the number of incoming waste loads that will be observed by the third-party inspector during the inspection: Standard:Pursuant to 310 CMR 19.018(7)(e)1, the minimum number of loads observed during the inspection will be: For a facility permitted to accept from 1 to 99 tons of waste per day, four (4) vehicle loads. For a facility permitted to accept greater than 99 but less than 299 tons of waste per day, eight (8) vehicle loads. For a facility permitted to accept greater than 299 but less than 499 tons of waste per day, twelve (12) vehicle loads. For a facility permitted to accept greater than 499 but less than 999 tons of waste per day, sixteen (16) vehicle loads. For a facility permitted to accept more than 999 tons of waste per day, twenty (20) vehicle loads. Alternative:Pursuant to 310 CMR 19.018(7)(e)2, an alternative number of loads* will be observed during the inspection. Identify the number of loads and provide the basis for using this alternative:Number of Loads *Note: As an alternative to the minimum number of loads set forth at 310 CMR 19.018(7)(e)1, for a facility that has operated below the facility’s permitted capacity for the previous year, the third-party inspector may apply the average actual daily receipt of waste (in tons) over the preceding year (instead of the permitted tonnage amount) to the minimum load criteria set forth at 310 CMR 19.018(7)(e)1. Explanation: Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 4 of 8 D. OTHER PLANS, APPROVALS & ORDERS List all other relevant permits, plans, approvals, orders or other enforcement actions issued to the facility by the Department that contain specific practices, procedures, and other requirements still in effect for waste ban compliance at the facility. Where applicable, provide the plan or issue date for each item. For enforcement actions, include the document number, effective date and status of implementation by the Facility. Permits/Plans/Approvals: MassDEP Provisional Approval, Renewal of Authorization To Operate, dated: September 28, 2008 Application for Renewal of Authorization to Operate, dated: July 2014 Operation and Maintenance Plan, Revision 4 (Part of Application for ATO Renewal), dated: July 2014 Waste Ban Compliance Plan, dated: June 2014 V. Inspection Observations During the inspection and for the minimum number of loads as required pursuant to 310 CMR 19.018(7)(e), the third-party inspector shall examine and evaluate waste ban compliance as follows: A. OPERATIONS & RECORD-KEEPING Examine and evaluate the facility’s operations and record-keeping related to waste ban compliance. Performance Standard Response Comments/Observations and Recommended Corrective Action(s) Is the ongoing monitoring of incoming waste being conducted in accordance with the facility’s approved waste ban compliance plan and other applicable requirements? YES NO Are the comprehensive load inspections of incoming waste being conducted in accordance with the minimum inspection frequency set forth in the facility’s approved waste ban compliance plan? (Refer to Section IV.B. above.) YES NO Are the results of the ongoing monitoring and comprehensive load inspections being properly documented in accordance with the facility’s approved waste ban compliance plan and other applicable requirements? YES NO Is the failed load communication, including failed load letters as applicable, being conducted in accordance with the facility’s approved waste ban compliance plan and other applicable requirements? YES NO No failed loads this period. B. LOAD OBSERVATION Once the third-party inspector begins the Waste Ban inspection, the third-party inspector shall visually monitor and document all incoming loads received at the facility during the inspection until the applicable minimum number of loads containing at least five cubic yards of material each have been observed. (Refer to Section IV.C. above.) Please retain photographs and a copy of the weigh slip (if applicable) for each failed load identified during the inspection. Do not submit photographs or weigh slips with this inspection report; MassDEP may request such information to be submitted separately. Report data for each load observed during the inspection by completing the table provided by the Department online at: http://www.mass.gov/eea/agencies/massdep/recycle/approvals/solid-waste-applications-and-forms.html#8. Note: the completed Load Observation Table will be submitted to the Department electronically. Refer to the instructions in Section VII. Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 5 of 8 General Comments/Observations: Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 6 of 8 C. COMPARATIVE ANALYSIS Pursuant to 310 CMR 19.018(8)(b)2.b., the third-party inspector shall provide a comparative analysis of the percentage of failed loads identified by the third-party inspector during the inspection and the percentage of failed loads documented pursuant to the ongoing load inspections conducted over the immediately preceding inspection period in accordance with the facility’s approved waste ban compliance plan. For the purposes of the comparative analysis, the preceding inspection period should consist of the appropriate number of whole months prior to the inspection. For example, if a semi-annual inspection is required (one inspection every six months), then the comparative analysis for an inspection that occurs in November should include waste ban compliance data from May through October (the preceding whole six months). Prepare the comparative analysis required by 310 CMR 19.018(8)(b)2.b. by completing the comparative analysis summary provided by the Department online at:http://www.mass.gov/eea/agencies/massdep/recycle/approvals/solid-waste- applications-and-forms.html#8. Note: the completed Comparative Analysis Summary will be submitted to the Department electronically. Refer to the instructions in Section VII. General Comments/Observations: Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 7 of 8 VI. Summary and Recommendations Pursuant to 310 CMR 19.018(7)(c)4. where a third-party inspector observes that waste ban compliance at the facility deviates from the applicable requirements set forth at 310 CMR 19.018(7)(c)1., the third-party inspector shall document all such deviations and recommend corrective actions for the facility to take to return to compliance. A. INSPECTION RESULTS Based on the examinations and evaluations conducted in Section V., please summarize the inspection results by checking one of the following determinations: No deviations from the applicable waste ban compliance performance standards or additional requirements listed at 310 CMR 19.018(7) were identified during this inspection. If no deviations were identified during the inspection, check this box and proceed to Section VI.B. Deviations from the applicable waste ban compliance performance standards or additional requirements listed at 310 CMR 19.018(7) were identified during this inspection and are discussed further in this report. If deviations were identified during the inspection, check this box and ensure that each deviation and the recommended corrective actions are discussed in the applicable section(s) below. B. STATUS OF PREVIOUS RECOMMENDATIONS FOR CORRECTIVE ACTION If a previous waste ban compliance inspection report identified deviations with recommendations for corrective action, please describe the action(s) taken since the last inspection to return the facility to compliance with the applicable requirements. Discussion: N/A C. RECOMMENDATIONS FOR CORRECTIVE ACTION Based on the results of this inspection, please provide recommendations for corrective action to return to compliance, if necessary. Recommendations: None VII. Additional Information Checklist Attach the following additional information, as applicable, to complete the inspection report.* Complete the Load Observation Table as required in Section V.B. and submit an electronic copy of the completed table to the Department via email at:dep.swm@state.ma.us. Retain photographs and weigh slips for all failed loads identified during the inspection, as required in Section V.B. Do not submit photographs or weigh slips with this inspection report; MassDEP may request such information to be submitted separately. Complete the Comparative Analysis as required in Section V.C. and submit an electronic copy of the completed analysis to the Department via email at:dep.swm@state.ma.us. *Note: Pursuant to 310 CMR 19.018(8), MassDEP may request additional information. Continue to Certification Statement on Next Page ► Massachusetts Department of Environmental Protection Bureau of Waste Prevention / Solid Waste Management Third-Party Inspection Report – 310 CMR 19.018(8) Waste Ban Compliance Third-Party Inspection Report (Waste Ban)Page 8 of 8 VIII. Certification –THIRD-PARTY INSPECTOR "I attest under the pains and penalty of perjury that: 1. I have personally examined and am familiar with the information contained in this submittal, including any and all documents accompanying this certification statement and any and all electronic data required to be submitted to the Department as part of this third-party inspection report; 2. Based on my inquiry of those persons responsible for obtaining the information, the information contained in this submittal and such documents and electronic data is, to the best of my knowledge, true, accurate and complete; 3. I have provided to the facility owner or operator the electronic data (i.e. load observations and quarterly comparative analysis) required in section VII; 4. I have been able to conduct the third-party inspection and prepare the third-party inspection report without being influenced by the facility owner or operator and, (if I am a municipal employee) without being influenced by my municipal employer, by any coworker or by any elected or appointed official of the municipality; and 5. I am aware that there are significant penalties, including, but not limited to, possible administrative and civil penalties for submitting false, inaccurate, or incomplete information and possible fines and imprisonment for knowingly submitting false, inaccurate, or incomplete information.” Signature of Third-Party Inspector Michael Quatromoni Print Full Name SITEC Environmental, Inc. Company Name Date (MM/DD/YYYY) IX. Certification –FACILITY OWNER/OPERATOR "I certify under the penalty of law: 1. That I have personally examined and am familiar with the information submitted in this document and all attachments, including the electronic data (i.e. load observations and quarterly comparative analysis) required in section VII, and that, based on my inquiry of those individuals immediately responsible for obtaining the information, I believe that the information is true, accurate and complete. I am aware that there are significant penalties both civil and criminal for submitting false information including possible fines and imprisonment. 2. That, in the event that this inspection report contains a recommendation for corrective action(s), I have completed and attached to this report a Corrective Action Plan and Schedule*, pursuant to 310 CMR 19.018(8)(c)2.” *Note: The owner or operator may elect to correct deviations identified in the Third-Party Inspection Report in a manner that is different than that recommended by the Third-Party Inspector, so long as the facility is brought back into compliance with applicable requirements. Signature of Responsible Official Martin Scully Print Full Name Managing Member, Waste Options Nantucket, LLC Title Date (MM/DD/YYYY) ►Pursuant to 310 CMR 19.018(8)(c), a copy of each third- party inspection report shall be maintained at the facility in accordance with the requirements of 310 CMR 19.000. The owner and operator shall make third-party inspection reports available to personnel or authorized representatives of the Department for review at the facility upon request. Within 30 days of the inspection date: Mail this completed form to the MassDEP Regional Office that serves the municipality in which the facility is located. (Attention: Solid Waste Management) Send one copy to the local board of health for the municipality in which the facility is located. A list of municipalities and MassDEP Regional Offices is available online at: http://www.mass.gov/eea/agencies/massdep/ about/contacts/find-the-massdep-regional- office-for-your-city-or-town.html Facility Name: Facility RO: Date Range: Prepared by: Total Loads Total Number of Loads Number of Failed Loads % of Failed Loads Facility Data 6304 0 0.00%No failing loads reported Third Party Data 4 0 0.00% Analysis of Failed Loads by Material Facility Data Material # of Failed Loads % of Total Failed Loads Lead-acid Batteries 0.00% Tires 0.00% CRTs 0.00% White Goods 0.00% Paper (including OCC)0.00% Containers (glass, plastic, metal)0.00% Leaf & Yardwaste 0.00% Commercial organic material 0.00% C & D ( asphalt, brick, concrete, metal, wood, clean wallboard)0.00% Combined 0.00% Totals 0 0.00% Third Party Data Material # of Failed Loads % of Total Failed Loads Lead-acid Battery 0.00% Tires 0.00% CRTs 0.00% White Goods 0.00% Paper (including OCC)0.00% Containers (glass, plastic, metal)0.00% Leaf & Yardwaste 0.00% Commercial organic material 0.00% C & D ( asphalt, brick, concrete, metal, wood, clean wallboard)0.00% Combined 0.00% Totals 0 0.00% Rev 180829 Nantucket Transfer Station 457936 October 16, 2018 through April 15, 2019 Mike Quatromoni No failing loads observed. All C&D to sent off-island processing facility. NANTUCKET TRANSFER STATIONWASTE OPTIONS NANTUCKET, LLCINSPECTION DATE: 4/16/2019 LOAD# FAC_NAME FAC_RO FAC_DATE TIME_OBSERVED HAULER_NAME TRUCK_TYPE GEN_NAME FAC_INSP_FNAME FAC_INSP_LNAME WB_BATT WB_TIRE WB_CRT WB_WHITEGOOD WB_RECYC_PAPER WB_GMP_CONT WB_LEAFYARD WB_ABCMW WM_COMORG WB_COMB WM_PHOTOS COMMENTS Rev 180829<example>AAA TransferStation 123456 3/22/14 8:30 AM Blank Disposal Company compactorXYZWarehouse, Boston, MA Joe Smith 0 0 2 50%0%0%0%0%0%5 Cardboard 1 NANTUCKET TRANSFER STATION 457936 4/16/19 10:15 AM ISLAND DISPOSAL ROLL-OFF MIKE QUATROMONI 1 100% BULKY WASTE FROM DROP OFF AREA2 NANTUCKET TRANSFER STATION 457936 4/16/19 10:35 AM ISLAND RUBBISH CONTAINER SERVICE DUMP BODY MIKE QUATROMONI 2% 90% 1 TRANSFERRED OFF-SITE FOR RECYCLING3 NANTUCKET TRANSFER STATION 457936 4/16/19 11:10 AM TOSCANA CORP ROLL-OFF MIKE QUATROMONI 5% 75% 1 TRANSFERRED OFF-SITE FOR RECYCLING4 NANTUCKET TRANSFER STATION 457936 4/16/19 11:20 AM FLINTSTONE LANDSCAPING ROLL-OFF MIKE QUATROMONI 1 MISC. DEMO DEBRIS. NO WASTE BAN ITEMS SEEN